So you’ve got your new Pit Boss Smoker, and you’re excited to start smoking meats. But when you fire it up, you notice that the smoke isn’t coming out as much as you thought it would. Why is this happening?
Pit Boss, not smoking can be caused by setting the cooking temperature too high, using poor quality pellets, or filling the pellet cup with ash. To troubleshoot these smoker issues, however, we want to draw your attention to the following:
Pit Boss Pellet Grills burn fuel extremely clean. Almost invisible blue smoke erupts from them. It is easy to know if it generates smoke by observing the meat.
If you’ve ever wondered why your Pit Boss doesn’t seem to be smoking, there are a few possible explanations. Let’s look at each of these possibilities and see if we can figure out what’s going on.
- How Much Smoke Should Come Out Of My Pit Boss Pellet Smoker?
- Why Does My Pit Boss Not Smoke?
How Much Smoke Should Come Out Of My Pit Boss Pellet Smoker?
If you are new to smoking with a Pit Boss Pellet Smoker, you may be wondering how much smoke should be coming out of the pellet smoker. The amount of smoke will vary depending on what type of wood pellets you are using and how hot you have your smoker set.
Some woods, like hickory or mesquite, will produce more smoke than others. If you use very smoky lumber, you may not need to set your smoker as hot to make the same amount of smoke as less smoky wood.
In general, you should see some smoke from your Pit Boss Pellet Smoker when it is first turned on and while it is coming up to temperature. Once it has reached its set temperature, the smoke should lessen. Using very smoky wood, you may see more smoke throughout the cooking process.
If you are not seeing any smoke coming out of your smoker, a few things could be causing this. Let’s discuss them in detail.
Why Does My Pit Boss Not Smoke?
There are several reasons why your Pit Boss might not be smoking. We are going to go over the most common reasons below.
1. Smoking But You Can’t See It
It is the most common reason why your Pit Boss isn’t smoking. If you can’t see the smoke, the smoker isn’t hot enough. The ideal temperature for smoking is between 225-250 degrees Fahrenheit. If your smoker is lower than this, it won’t produce enough smoke.
How To Fix It:
The first thing you want to do is check the temperature inside of your smoker. You’ll need to increase the heat if it’s lower than 225 degrees. One way to do this is by opening the vents on your smoker. It will allow more air to flow through and make the fire hotter. You can also add more charcoal to your fire.
Another way to increase the heat is using a hair dryer or fan to blow air into the smoker. It will help to stoke the fire and make it hotter. If you’re still having trouble getting your smoker up to temperature, you can try using an electric heater. Just be careful not to put it too close to the smoker.
Once you’ve increased the heat, you should start seeing smoke from your Pit Boss. If not, there could be another problem.
Read Also: Pit Boss Austin XL Review – Is it Worth Buying?
2. Temperature May Be Higher Than Needed
It’s easy to overshoot the temperature when you’re smoking. If the temperature inside of your smoker gets too high, it can cause the food to dry out. It is especially true if you’re cooking for an extended period.
How To Fix It:
The best way to fix this problem is to keep an eye on the temperature inside of your smoker. If it gets too hot, you can open the vents to let some of the heat out. You can also try moving the food to a lower rack. It will help to protect it from direct heat.
Another way to prevent this problem is by using a water pan. It will help to keep the temperature inside of the smoker down. Just ensure you don’t use too much water, or it can cause the food to steam instead of smoke.
If your food is getting dry, you can try wrapping it in foil. It will help seal moisture and prevent the food from drying out.
3. Pellet Cup Is Filled With Ash
If your pellet cup is filled with ash, it can block the airflow and prevent the pellets from igniting. It can be a problem if you’re using a pellet smoker.
How To Fix It:
The best way to fix this problem is to empty the ash of the pellet cup. You can do this by opening the door to the pellet smoker and using a brush to sweep the ash out. You can also try using a vacuum cleaner with a hose attachment.
Once you’ve removed the ash, you should be able to see the pellets again. If not, there could be another problem.
Read Also: Smoker Turning Food Black: What is the reason?
4. You Add Moist Pellets
If you add moist pellets to your smoker, it can cause the fire to go out. It is because the moisture in the pellets will extinguish the fire.
How To Fix It:
The best way to fix this problem is to let the pellets dry out before using them. You can spread them out on a baking sheet and put them in the oven on low heat.
Another way to dry out the pellets is by using a hair dryer or fan. Just be careful not to blow the pellets all over the place.
Once the pellets are dry, you should be able to use them without problems. If not, there could be another problem.
5. Not Enough Airflow
If there isn’t enough airflow, it can prevent the fire from burning. It can be a problem if the vents on your smoker are blocked.
How To Fix It:
The best way to fix this problem is to check the vents on your smoker. If they’re blocked, you’ll need to clear them. One way to do this is by using a brush to sweep the debris. You can also try using a vacuum cleaner with a hose attachment.
Another way to improve airflow is by opening the door to the smoker. It will allow more air to flow through and make the fire hotter. Just be careful not to let all of the heat out.
6. You Use The Wrong Type Of Wood
If you use the wrong type of wood, it can cause the fire to smoke. It is because some woods are denser than others and don’t burn.
How To Fix It:
The best way to fix this problem is to use a different type of wood. Some good options include hickory, cherry, and apple. Ensure you don’t use too much, or it can cause the fire to go out.
Another way to fix this problem is using wood chips instead of pellets. It will help to create more smoke without adding too much wood.
Read Also: How to reheat smoked meat? (5 Easy Methods)
7. Auger Not Turning
If your auger isn’t turning, it can prevent the pellets from being fed into the fire. It can be a problem if you’re using a pellet smoker.
How To Fix It:
The best way to fix this problem is to check the auger. If it’s not moving, you may need to replace it. Another way to fix this problem is by cleaning the auger. It will help to remove any debris that’s blocking it. You can also try manually turning the auger. Just be careful not to force it, or you could damage it.
Once you’ve fixed the problem, you should be able to use your smoker without any issues. These are just some of the most common problems people have with their smokers. If you’re having trouble with yours, check one of these things and see if it solves the problem.
How do I keep the meat moist when smoking?
You can do a few things to make sure your meat comes out moist and juicy. First, invest in a quality smoker. A good smoker will help regulate the temperature and prevent the meat from drying. Second, soak your wood chips in water for 30 minutes before adding them to the smoker.
It will help create steam and add moisture to the smoking process. Third, use a meat thermometer for cooking the meat to the proper temperature. Overcooking will dry out the meat and make it challenging.
What is the difference between barbecuing and grilling?
Barbecuing is a slow process that uses indirect heat and smoke to cook the meat. Grilling is a quick-cooking process that uses direct heat to cook the meat. Read the complete guide here.
What temperature should I smoke my meat at?
The ideal smoking temperature is between 225 and 250 degrees Fahrenheit. This low and slow cooking method will help tenderize the meat and give it flavor.
How do I get more smoke from my Pit Boss?
Adjusting the smokestack damper will help to increase the amount of smoke produced by your smoker. If you find that your Pit Boss is not producing enough smoke, first check to make sure that the smokestack damper is open all the way. If it is, then try adjusting the position of the water pan. Moving the water pan closer to the heat source will help to produce more smoke.
What is the best way to clean my pit boss?
The best way to clean your Pit Boss is to remove all of the parts and wash them with soapy water. Be sure to rinse all of the parts thoroughly and dry them completely before reassembling your smoker.
How do I regulate my pit boss temperature?
You can regulate the temperature of your Pit Boss by adjusting the intake and exhaust vents. The intake vent should be open all the way when you are first lighting your smoker. Once the smoker is up to temperature, you can begin to close the intake vent to help maintain the desired temperature. The exhaust vent can be used to further regulate the temperature of your smoker.
Smoking meat is a great way to add flavor and tenderness. However, it’s essential to make sure you’re doing it correctly. If not, you could end up with dry, tough meat. By following these tips, you can ensure that your meat comes out moist and juicy every time.